AIPS 31DEC14 インストール 奮闘記【１】
研究において、FITSファイルを解析する必要があるので、AIPSのインストールに挑戦してみる。
/usr/localの下に、aips/を作るところは省略。
参考：http://kagoshima-au.blog.so-net.ne.jp/2011-10-28-2
以下、実行結果とそのログを記録しておく。
===================== AIPS 31DEC14 Install Wizard=====================
Screen 0: Re-Introduction
-------------------------
Welcome back to the AIPS Install Wizard (AipsWiz).
It would appear you've been here before.
If you REALLY want to start over, you may want to remove
the .AIPSRC file in this account's home directory.
Otherwise, you can skip forward to a specific screen by
entering its number at the prompt. The default action
is to simply start at screen 1. Screens are:
1. Optionally download 31DEC14 tarball (skipped if CD or network (binary) download)
2. Confirm that tarball is correct (skipped if CD or network)
3. Choose AIPS_ROOT, optionally unpack tarball (skipped if CD or network)
4. Group ownership, group write enable/disable
5. Site name, Architecture
6. Additional hosts
7. Data area definition
8. Printer setup
9. Tape drives
10. Advanced settings
11. Final check before doing the install
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Press <ENTER> or <RETURN>, or enter a screen number: 「エンター」
===================== AIPS 31DEC14 Install Wizard=====================
Screen 4: Group Ownership
-------------------------
If more than one account is going to be using AIPS, you should select
a 'Unix group' for these accounts. This can,
but need not be, their primary group.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> What group should be used for AIPS? [kensuke] kensuke
===================== AIPS 31DEC14 Install Wizard=====================
Screen 4b: Group Write
----------------------
If more than one account will use AIPS, and you are using
a group (kensuke) to permit filesharing, you should also allow this group
write access to certain AIPS files.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Allow kensuke to have write access? [YES] 「エンター」
===================== AIPS 31DEC14 Install Wizard=====================
Screen 5: Site Name
-------------------
You have already indicated your site name to be KAKIUCHI
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Press <RETURN> to confirm, or enter a new name: Kakiuchi
===================== AIPS 31DEC14 Install Wizard=====================
Screen 5a: Site type
--------------------
If your site consists of a single portable computer
which may get different names at different times,
it is best to force the name for AIPS to LOCALHOST.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> If you want this, enter Y or y [N] エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 5b: Architecture Confirmation
------------------------------------
Your architecture appears to be LINUX
If this is correct, press RETURN or ENTER.
If not, enter the correct architecture (or ? for a list)
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Enter the architecture for this system [LINUX] エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 6: Additional hosts if any
---------------------------------
You may configure your installation so it runs on many systems,
sharing the AIPS ROOT area via NFS. The list of host(s) is now:
Any new hosts will initially be set to arch=LINUX, but you can
change this by editing HOSTS.LIST in /usr/local/aips
when the install is finished.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Enter new hosts (no commas!) or UBUNTU to reset: エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 7: User Data Areas
-------------------------
At least one data area needs to be defined for AIPS user data.
Do it here unless there is already a DADEVS.LIST file. It is
important that the host name in caps appear in the data area name.
Currently these area(s) are defined:
/usr/local/aips/
/usr/local/aips/DATA/kensuke_1
//
You can add to this list after installing by editing the two files
DADEVS.LIST and NETSP in the /usr/local/aips/DA00/ directory.
Please enter (additional) data area(s) now as a space-separated list,
or the word RESET to re-set the list.
(If you want to use symlinks, use the notation
actual_directory_location:symbolic_link_location
instead of a simple directory location.)
The suggested data area is /usr/local/aips/DATA/UBUNTU_1
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Data Areas: /usr/local/aips/DATA/kensuke_1
===================== AIPS 31DEC14 Install Wizard=====================
Screen 8: Printers
------------------
You may define several printers for use with AIPS.
These will appear on startup as numbered choices to the user
At least one printer must be defined. Currently defined:
(no printers are defined yet)
Paper Format: A4
You can modify printer definitions after the install by
editing the file /usr/local/aips/DA00/PRDEVS.LIST .
Please indicate whether you want to
- add (N)ew printers
- (D)iscover your system's printers (may not work),
- (A)ccept the current settings as is, or
- (R)eset to clear the list.
(Paper format - A or A4 - will come next)
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Your choice (default: Accept):エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 8: Printers
------------------
You may define several printers for use with AIPS.
These will appear on startup as numbered choices to the user
At least one printer must be defined. Currently defined:
(no printers are defined yet)
Paper Format: A4
You can modify printer definitions after the install by
editing the file /usr/local/aips/DA00/PRDEVS.LIST .
Please indicate whether you want to
- add (N)ew printers
- (D)iscover your system's printers (may not work),
- (A)ccept the current settings as is, or
- (R)eset to clear the list.
(Paper format - A or A4 - will come next)
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Your choice (default: Accept): エンター
AipsWiz: ==> Do your printer(s) use A or A4 paper? [A4]: エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 9: Tape Drives
---------------------
If your network has any tape drives you would like to use for AIPS,
you can specify those now. You need to configure each tape drive
machine to run AIPS (or a subset of it). Current definitions:
(no tape drives are defined yet)
You can add to this list after the install by editing TPDEVS.LIST
in the /usr/local/aips/DA00 area.
Please indicate whether you want to
add (N)ew tape drive(s)
(D)iscover tape drives on UBUNTU (may not work)
(A)ccept the current settings as is, or
(R)eset to clear the list.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Your choice (default: Accept): エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 9B: Tape Hosts
---------------------
THIS IS IMPORTANT: READ ME!
The TPMON daemons that are automatically started or restarted
with each AIPS session are servers that give remote systems
access to your local tape drives (TPMON2,3,...) and FITS
disk area (TPMON1). There is a mechanism to restrict connections
to a set of hosts and/or IP addresses. You need to indicate what
remote system(s) if any are allowed to use your tapes
and FITS disk area. The default configuration is to ONLY allow
your local host (127.0.0.1). The list of hosts and/or IP addresses
is currently set to:
-----------------------------------------------------------------
127.0.0.1
-----------------------------------------------------------------
You can modify this list after the install by editing file TPHOSTS
in the /usr/local/aips/DA00 area. Each line in the file can be
- an IP address, e.g. 192.33.115.11
- a fully qualified domain name, e.g. orangutan.cv.nrao.edu,
- a limited IP address wildcard, e.g. 192.33.115.*, or
- a limited domain name wildcard, e.g. *.cv.nrao.edu.
Please indicate whether you want to
add (N)ew entries
(A)ccept the current settings as is, or
(R)eset to the default.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> Your choice (default: Accept): エンター
===================== AIPS 31DEC14 Install Wizard=====================
Screen 11: FINAL REVIEW before installing!
------------------------------------------
This is your last, best hope for checking the settings before
committing to the install. Please check these settings, and
make sure they are what you want:
AIPS_ROOT (screen 3): /usr/local/aips
Group (screen 4): kensuke
Group Write (screen 4): YES
Architecture (screen 5): LINUX
Site name (screen 5): KAKIUCHI
AIPS hosts (screen 6): UBUNTU
Data areas (screen 7): /usr/local/aips/
/usr/local/aips/DATA/kensuke_1
//
Printers (screen 8): Paper type (screen 8): A4
Tape drives (screen 9):
Tape hosts (screen 9): 127.0.0.1
You can skip back to a previous menu by entering its number,
or use the phrase 'start over' to go back to the beginning.
[You may also type B for back, or Q to Quit]
AipsWiz: ===> [A]ccept (default) or menu number:エンター
AipsWiz: ==> Confirm: start the install with these settings [Y]: エンター
～～～～～～～～～～～～～～～～～～～～～～～～～
sent 436 bytes received 27744 bytes 8051.43 bytes/sec
total size is 79850 speedup is 2.83
===========================================================================
National Radio Astronomy Observatory computing facilities are exclusively
for the use of authorized personnel, who are expected to abide by the
terms of the NRAO Computing Security and Computing Use Policies.
===========================================================================
receiving incremental file list
CVS/
CVS/Entries
CVS/Repository
CVS/Root
sent 90 bytes received 699 bytes 225.43 bytes/sec
total size is 78 speedup is 0.10
cp: `LINUX/SYSTEM/MASTER/*' を stat できません: そのようなファイルやディレクトリはありません
rm: `AIPS' を削除できません。: そのようなファイルやディレクトリはありません
rm: `aips' を削除できません。: そのようなファイルやディレクトリはありません
rm: `UPDCONFIG' を削除できません。: そのようなファイルやディレクトリはありません
AipsWiz: -- done.
AipsWiz:
The AIPS Midnight Job is a way to keep your AIPS
AipsWiz: installation up to date. It is secure, relatively
AipsWiz: easy, and can be done on demand or in a cron job
AipsWiz: (i.e. periodically, daily or weekly or whenever).
AipsWiz: It does require that you have the cvs software
AipsWiz: package installed on your system.
AipsWiz: This script will set up the infrastructure for you
AipsWiz: to be *able* to run the Midnight Job (MNJ), but you
AipsWiz: have the power to make it run or not.
chgrp: `MAKE.BMNJ'にアクセスできません: そのようなファイルやディレクトリはありません
AipsWiz: About to run 'MAKE.BMNJ '...
AipsWiz: This will generate a fair bit of output.
.: 1: Can't open /usr/local/aips/31DEC14/LINUX/SYSTEM/KAKIUCHI/CDVER.SH
AipsWiz: Not good; no /usr/local/aips/31DEC14/LINUX/SYSTEM/KAKIUCHI/UPDCONFIG found; did MAKE.BMNJ fail?
AipsWiz: You should investigate this.
AipsWiz: ==> Press <ENTER> to acknowledge::
AipsWiz: =====> Generate system files via FILAIP/POPSGN...
AipsWiz: This will generate some output, including a copyright (left)
AipsWiz: statement and some prompts, but should end with a 'Done!' if
AipsWiz: everything worked...
AipsWiz: About to run FILAIP. If this is a re-installation, you
AipsWiz: will be prompted for an AIPS Manager password. The
AipsWiz: default password is AMANAGER
Data disk assignments:
DADEVS.PL: This program is untested under Perl version 5.010
(Using global default file /usr/local/aips/DA00/DADEVS.LIST for DADEVS.PL)
DADEVS.PL error - no disks selected at all
This is a FATAL error and nothing in AIPS will work.
=========================================================
HELP! No Defined data areas! You can proceed now to run
program FILAIP, but you may see LOTS of complaints about
not being able to access the message file. If you think
there should have been some data areas defined, please
check DADEVS.LIST or .dadevs files, or AIPSASSN.\*
=========================================================
If you want to proceed, enter YES (uppercase) now:
AipsWiz: Error: FILAIP did not work, or there's a missing file!
AipsWiz: Error: This may mean that FILAIP did not work (it should have
AipsWiz: Error: created it and many other files in that area).
AipsWiz: Error: You can try running it by hand after (a) dotting the
AipsWiz: Error: LOGIN.SH file or sourcing the LOGIN.CSH file; and
AipsWiz: Error: (b) Typing 'RUN FILAIP'. You will then be asked for
AipsWiz: Error: two parameters. Use
8 2
AipsWiz: Error: as the standard values.
AipsWiz: Error: You will also have to RUN POPSGN if that works;
AipsWiz: Error: Feed it
0 POPSDAT TST
AipsWiz: Error: when it asks for Idebug, etc. and press RETURN when
AipsWiz: Error: you see the '>' prompt.
AipsWiz: Install Wizard stopping. Current settings saved in ~/.AIPSRC
AipsWiz: Abandoning ship! Goodbye.
========================================================================
ウーン。
うまく、いかない。
